Water-cooled xenon lamp aging test chamber correct maintenance method can extend the life of the tes

Water-cooled xenon lamp aging test chamber The method of testing depends on the needs of the test, and each method is very effective. Appropriate test equipment should be selected based on the detected product or materials, application conditions, degradation models, and budget considered.

Note:

Water-cooled xenon lamp aging test chamber Exemptions can be exempted from malfunction, correct maintenance can extend the life of the test chamber.

1, in operation, unless there is a need to open the door of the test chamber, do not open the door of the device, otherwise it will cause adverse consequences.

2, provide instructions for detecting the product, protect the safety of the test chamber operator, please check the water pressure controller and water level of the circulating water tank regularly.

3, the test cloth of the tester's wet ball can ensure the correctness of the relative humidity.

4, please read this manual in detail and operate the test chamber.

Water-cooled xenon lamp aging test chamber installation location

1, the mounting position should be considered by heat dissipation and usually easy to check Maintenance

Second, the distance between the running wall and other machines has a small distance of more than 600mm.

Third, the arrangement is no vibration on flat.

Fourth, the ventilation mode is better, not direct sunlight.

V. This machine should stay away from heat and flammable and explosive items.

Sixth, power supply lines and drains should be shortened as possible.

Seven,

Water-cooled xenon lamp aging test chamber

Select less dust and moisture and pass.