The QUV photocodynation tester can reproduce the destruction of several months or years to produce a few months: including Fading, discoloration, powdering, cracking, brightness decrease, variation, embrittlement, strength decrease, and oxidation. Reliable aging test data can accurately correlate the weather resistance (anti-aging) nature of the product, and help the screening and optimization of materials and formulations. It has become a global use of the most widely used aging test chamber in the world, there have been thousands of QUV photocondensing testers .
Optical Tester Function
can simulate the most important short-wave ultraviolet light in the sunshine, the aging of material physical properties caused by the illuminating light. Wet SimulationThe models of all photocondosition testers provide thermal condensation moist cycles, a harsh and real moist exposure environment. In general, products exposed to outdoor are often in a humid state in humidity for 15 hours. The photocodynate tester provides two moisture simulation methods. Because some application conditions also require water spray to achieve the actual effect, some of the photocodynation tester models can operate both condensation cycles and run water spray cycles.
The condensing method is the best way to simulate outdoor moisture erosion and the most application. All of the photocondens testers can operate in condensation cycles
In the design of the photocondary tester, the sample actually constitutes the sidewall of the test chamber, and the back surface of the sample is exposed to the laboratory indoor air. The cooling effect of indoor air results in a low surface temperature than the water vapor temperature, thereby ensuring that the water vapor continuously condenses the surface of the sample. This condensate is a very stable pure distilled water.* Water spray
Photoelectric tester spray type can simulate the effect of rainwater, such as thermal impact and water erosion.
Under certain actual applications, such as in the sun, the amount of material is rapidly dissipated due to a sudden shower, and the temperature of the material will have a sharp change, generate thermal shock, this thermal shockMany materials are a test. QUV water spray can simulate thermal shock and / or stress corrosion
fiber reinforcement Recommended specifications, performance requirements, and test procedures on thermoset profiles
This specification describes test procedures and performance requirements for high performance organic coatings. Such coatings are applied to fiber reinforced thermoset profiles (windows , Doors and similar products).
This test method provides various textile materials (including coating fabrics and by them). Manufactured products) expose the test of the test. Testing is used in laboratory manual aging exposure devices, using fluorescent ultraviolet lamps as light sources, using condensation humidification and / or spray humidification.
Laboratory accelerated aging program evaluates standard test method for color fastness of building structural sealing agentThis test method describes the use of fluorescence Ultraviolet or xenon lamp test equipment Determination of laboratory accelerated aging procedures for building structural sealing reservoirs.
Laboratory accelerated aging standard test method for building structural sealant weather resistance assessment This test method is sealant weather resistance The measurement method is based on the ability to maintain adhesion and aggregation in the cycle motion based on repeated exposure to the laboratory accelerated aging procedure.
Standard Test Method for Rubber Aging - Discharge
this test caused by ultraviolet (UV) and thermal exposure Method predetermined / micro-colored vulcanized rubber surface discoloration, ultraviolet or ultraviolet / visible light, and under controlled relative humidity or moisture and temperature conditions, as a controlled relative humidity or moisture and temperature conditions. Discharged.
Standard Guide for Coating Powder and Powder Coating Test
This guide specifies the selection and use of paint powder and powder coating test . The test method is listed in it. For a feature, if more than one test method is listed, there is no more suitable. The method to follow based on the requirements of experience and each case, as well as the agreement between the buyer and the seller.Optical Tester Model
QUV / SE
QUV / Spray with standard QUV / SEPhoto aging tester
basically, in spray Derived water is recommended when cycling.* Equipped with a water spray system, including nozzles, pipelines, control and drainage devices.
* Short-time spray can simulate thermal shock, long spray can be used to simulate mechanical erosion caused by rainwater.* Ultraviolet light, spray or condensation function can be realized.
Many industries require cool white light to perform indoor product light resistance test, QUV / CW Photo aging test The instrument can reproduce this indoor lighting environment.* Compliant with indoor light resistance test standards such as ISO, ANSI and ASTM.
* Equipped with sun eye radial illuminance control system to monitor the light intensity of the cold fluorescent lamp.* Use a cold white fluorescent lamp to simulate an indoor lighting environment, such as a fluorescent lamp commonly used in the office.
QUV / BASIC
* Control the irradiance by regularly replacing the lamp and the rotation lamp position. QUV / BASIC has a condensation function analog moisture, but does not have water spray function. * The high-radiation illuminance test cannot be performed because it is not equipped with the sun eye radial illuminance control system, and there is no automatic adjustment or calibration.The most commonly used photocondural tester model is QUV / Spray, QUV / SE. Understand more parameter information Welcome consultation: 400 6808 138
1, after-sales service support
Installing environmental survey: Weng open The company will arrange professional and technical personnel to survey the site. According to different products, it is put forward the installation requirements of electricity, water supply and exhaust, and our company issued a picture and preparation of the film;
Product free installation After the customer installation conditions have, we promised the province for a week, the province's two weeks were installed;
Product operation training: After the installation is completed, Wengkair will arrange professional and technical personnel will fully comprehensively Training, including the basic construction, working principle, daily operation, maintenance and maintenance and basic maintenance;
1 product provides free warranty, product warranty period repair, our company promises to respond 3 hours phone response, timely diagnosis Question, determine the solution; if the phone cannot solve and belong to an emergency, our company promises to send a free home delivery within 48 hours; the non-consumable material is damaged due to quality causes (by fire, flood, flood, magnetoelectric string, etc. Except for damage to the customer's factor), our company promises to replace free new parts;
2 Wait repair period repair, our company promises to respond 3 hours phone response, timely determine the problem, give the next step troubleshooting instruction If the phone cannot be solved and the customer agrees to pay the door, our company promises to resolve the province's one week, the customer undertakes the cost of replacement accessories;
3, the quality assurance
The accessories that our company are committed are imported. If other origin accessories must inform customers in advance.
4, professionals are equipped with
Our company is committed to at least 5 professional engineers, engineers accept the maintenance technical training of original manufacturers, and pass accordingly Test.