Small salt spray corrosion test chamber nozzle working principle

Small Salt Spray Corrosion Test Chamber Working Principle

Small Salt Spray Corrosion Test Chamber Summary:

1. Small Salt Spray Corrosion Test Chamber The entire PVC board system, the lining is implemented in advanced loop

2. Three-dimensional reinforcement technology, structural strength, deformed. The laboratory is warmed in five warm temperatures, which can indeed

3. Master the average temperature in the test chamber (1 Deg; C ). Nozzle: Numeri-specific sequestration of salt water and atomization will double the fog diffusion speed, and naturally fall on the test piece, no crystalline blockp phenomenon, the firing difference can be controlled to PLUSMN; 0.3 mL / 80 cm2h.

4. Saturated air adopts Henry Law. The humidity required to be heated and supplied with the tested chamber.

5. Temperature is a prerequisite for directing corrosion rates. The company uses P.I.D. Ways Temperature control, control error plusmn; 0.3 deg; C.

6. * Early warning equipment with low test solutions, when the test solution is only a 5-hour spray, the buzzer will notify the user to support the supplement to ensure continuous spray.

7. * Use full detection system, when the fault occurs, the light is displayed.

8. Has a spray and standing time period setting.