1. The measurement of the force value of the tensile test machine is to complete the measurement by measuring force sensor, enlarged and data disposal system.
Under the premise of a small deformation, a certain point of the elastic element epsilon; proportional to the force of the elastic element, and proportional to the elastic change. Taking the S -type test machine sensor as an example, when the sensor is effectively effectively, the appearance of the elastic element has a strain film, and because the elastic component's strain and the meticulous proportion of the external force P will be , Can be measured by the output voltage, and then measure the fineness of the force.
The measuring measurement of deformation is measured by variable measurement measurement. It is used to measure the deformation of the sample in the experimental process.
The installation has two chip, which is connected to the photoelectric encoder that is installed and installed at the top of the measuring installation through a biographical idea. When the interval between the two clips changes When the shaft is reversed, the photoelectric encoder will have a pulse flag lamp output. The disposal of the flag lamp by the disposal device can draw the deformation of the sample.
Third, the measurement of the beam displacement is roughly the same as the deformation measurement, all of which are measured by measuring the output pulse of the photoelectric encoder to obtain the displacement of the beam.
You can Send Message or email email@example.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
No. 2578 Gu Dai Road, Shanghai