Concentrate, accelerate the weather resistance test of the material, thereby obtaining experimental results of material weather resistance. It can simulate the purple
of the natural climate, rain, high temperature, high humidity, etc., by reproduce these conditions, combined into a cycle, and let it automate
Cycles. The test chamber is suitable for coatings, inks, paints, resins, plastics, rubber, printing packaging, adhesives, automobiles
Motorcycles, cosmetics, metals, electronics, electroplating, medicine, etc. The materials used to assess the material in fading, color change, gloss,
cracks, bubbles, embrittics, oxidation, etc. Thus, it provides a basis for the improvement of material formulations, and the improvement of product performance.;
UV aging test machine has three major advantages.
Advantage 1: Select South Korea imported Temi880 operating controller, PID control, 5.7-inch high-definition color liquid crystal contact display screen, ratio
Samples of domestic general buttons Femide, and, atmospheric, on-grade.
Advantage 2: UV lamps use US imports (Aspen Las) brands, the reason why the Asia-Parlas UV lamp is used by tangent
for them than domestic UV lamp tubes The function is more intensive, and the aging effect is increasing, and it can reproduce the test results very well.
Advantage 3: Style is diverse, whether standardized box is still a non-standard equipment planning, it has a very rich experience, satisfaction and appropriate
should be in many ways to customers. If the test area is easy to place, the sub-commodity is easy to place the test area; single UV illumination
Sub-use (UV light, spray water, cold condensation water) special requirements plan. It can be used in accordance with customer merchandise
, which can be used to imitate the damage effect of the data on the data of the harsh environment.;
1. During operation, please remember to maintain a sufficient water source.
2. Time to open the door should be minimized during the test phase.3. There is a sensing device in the workplace, do not suffer a strong hit.
4. After the use of the stop, if you need to use it again, you must carefully check the water source, power supplies, and components, and then start after you are correct.5. Because UV radiation has a strong harm to personnel (especially eyes), the operator should minimize the contact ultraviolet wire
; (the contact time should be less than 1 min). It is recommended that the operator is fitted with protective eyewear and sheath.
6. Apparatus should be kept dry, discharge the running water after running, dry the studio and box.7. After use, the plastic enclosure is used to avoid dust intrusion. If there is dust, it should be removed.
1, temperature range: RT normal temperature ~ + 80 ° C
2, humidity range: greater than or equal to 90% RH
3, temperature uniformity: plusmn; 1 ° C
4, temperature fluctuation: plusmn; 0.5 ° C
5, the center distance of the lamp tube: 70mm
6, the center distance of the test product and the lamp tube: 50mm plusmn; 3mm
7, irradiation: 1.0W / m2 can be adjusted
8, light, condensate, spray Test cycle
9, tube: l 1200 / 40W, 8 (UVA / UVB service life 2000h or more)
10, controller: UV anti-UV aging test machine color Touch screen Canada (RUESI3861P) intelligent controller.
11, temperature control mode: PID self-correction SSR control
12, standard test piece size: 75x300mm (special specific specification required)
13, sink water depth: 25mm automatic Control
14, effective irradiation area: 900x210mm
15, UV wavelength: UV anti-UV aging test machine UVA range is 315 ~ 400 nm; UVB range is 280 ~ 315 nm] 16, Test time: 0 ~ 999H (adjustable)
17, irradiation blackboard temperature: 50 ° C ~ 70 ° C
18, standard sample rack: 24 group midd 2
19, the unit has automatic spray function