Precautions for testing car parts with a xenon lamp aging tester

The application of xenon arc aging testing machines in the automotive parts industry is important and extensive. QINSUN Instruments Co., Ltd. is a manufacturer of textile testing instruments, which can provide various kinds of xenon arc aging testing machine. Technical R&D Engineers Briefly Explain Precautions for Testing Automotive Parts with xenon lamp aging tester.

1. To avoid reducing the instability of the detection and to ensure the accuracy of the detection, the equipment should be maintained and calibrated according to the manufacturer's guidelines of the equipment.

2. The test water should not leave any alluvium or

stains. The water content of liquid particles in ordinary water should not exceed 1ppm, and the water content of sio2 should not exceed 0.2ppm. The measurement of the sio2 water content must be veraccording to ASTM D859 or ASTM D4517. Composition The application of positive ionization method and reverse osmosis method can obtain water with specified purity.

3. When testing automotive components, first turn off all sprinklers on the equipment to avoid accidentally spraying the test product itself.

4. When testing automotive interior components, install an appropriate filter so that the spectrometer output power distribution (SPD) of the xenon arc lamp complies with Table D2 or D3 in Appendix D.

> 5. When testing automotive exterior parts, install an appropriate filter so that the spectrometer output power distribution (SPD) of the xenon arc lamp meets the requirements. Refer to Table D1 in Appendix D or D3 for typical spectrometer distribution ranges.