Xenon Lamp Sunlight Climate Test Box

Xenon Lamp Solar Climate Test Chamber/Xenon Lamp Test Chamber is a type of equipment that uses man-made lamp tubes to simulate the solar climate for experiments. Widely used in paints, rubber, coatings, plastics, chemicals, automobiles, electric vehicles, textiles, and other industrial products and materials to simulate solar radiation, various climate, and light aging tests by simulating light, spray, rain, light and dark, climate conditions such as temperature and humidity are used to measure the performance changes of material products such as aging, fading, fading, permeability, peeling, hardening and softening.

The relevant standards are met:

Leather: PV1303PV3929PV3930DVM0067-MAHESD6601NESM0135TSL0601GGMW3414EDS-T-7415D471431
Textile: GB/T8430AATCCTM16ASTMG26ASTMD2565ASTMD4459ASTMD66

95ASTMG155GB/T14576GB/T8427GB/T1189GB/T9344GB150.7GB/T16422.1

Technical parameters:

Model: LQ-XD1/LQ-XD2/LQ-XD3

Temperature control range of test chamber: 32~93℃; Resolution: 0.1℃/32~93℃; Resolution: 0.1℃/20~93℃; Resolution: 0.1℃

Test Humidity Control Range Chamber: Light Cycle: 10-85% RH; Resolution: 0.1% RH Dark Cycle: 30-100% RH; Resolution: 0.1% rel. 

Blackboard thermometer (optional): 35~120℃ Resolution: 0.1℃

Test time control range: ≤10000h

Irradiance control range: adjustable within 550W

Xenon arc lamp rated power: 6.5 kW/4.5 kW/3.5 kW

Rotational speedSpecimen rack speed: 1-10rpm adjustable

Specimen holder distribution diameter: Φ560mm; 3 layers/Φ520mm; 2 layers/Φ550mm

The size and number of sample holders that can be installed: sample exposure area 7200cm2, American standard 66 pieces/sample exposure area 3800cm2, American standard 35 pieces, national standard 47 pieces (optional) / Sample exposure area 2900 cm2, American standard 20 pieces, national standard 33 pieces (optional)

Timing for each sample holder: ≤10000h

Photoperiod: ≤1000h

Spraying time: ≤1000h

Power supply: three-phase, five-wire, AC 380V ± 10 PHz, 10kW