ATLAS Xenotest Beta+ FD Xenon Lamp Aging Tester

The ATLAS Xenotest Beta+ FD xenon lamp aging tester is used to ensure the stable quality of product components, determine whether the packaging materials are qualified, and help identify the product's shelf life.

product details:

product advantages:

1. Xenontest Beta+ FD is an advanced independent rotating frame xenon lamp tester, which has an exposure area of ​​4000 square centimeters. Its design is completely aimed at testing needs in the FMCG field, such as: beverages, food, personal care or home products. Beta+ FD enables consumer product manufacturers to perform tangible tests on products in a short period of time, usually with a real-time acceleration factor of 10-50 times.

2. Beta+ FD has two custom racks-a bottle rack and a packaging rack. Both of these sample racks can hold samples weighing up to 20 kg, and are suitable for various packaging shapes and packaging sizes.

3. Economical non-aging filters ensure the true simulation of all three common lighting conditions-outdoor sunlight/indoor sunlight/supermarket lights.

4. Equipped with a cooler to keep the test temperature at the actual level, even under high radiation conditions. Programming and monitoring can be done online.

Features:

·A set of 3 NXE 2200 xenon lamp tubes

· 4.000cm2 exposure area

·Color touch screen to directly set and display control parameters

·Directly set and control the irradiation intensity 300-400 nm or

·Directly set and control the black mark temperature

·Directly set and control the box temperature

·Display diagnostic information

·10 preset programs

·Multilingual user interface

·Test box with rotating rack, sample rack for special application

·Insulation test chamber and waterproof condensation edge

·The XENOCHROME filter system that is not easy to aging can be installed to simulate outdoor light and sunlight through glass

·Optional store lighting filter to simulate supermarket lighting conditions

·Sample rack XENONSENSIV 300-400nm or 300-800nm, used to measure and control irradiance (W/m2) and black mark temperature

·Optional temperature control: only control the box temperature (10-70 degrees), or control the box temperature and the blackboard temperature at the same time (25-120 degrees)

·The fan controls the temperature difference between the box temperature and the black mark temperature

·SunCool Beta+ cooler is used for extended CHT- and BST- temperature ranges at lower temperatures

·UV protection test box window

·Shut down operation by radiation exposure, light exposure time or total operating time

·Advanced automatic opening function

·Built-in memory chip to store instrument data

·Transfer and store data through RS 232 interface or memory card

·Realize the connection of the internal computer network through the Ethernet interface, and the use of XenoTouch Add-ons 1, 2, 3 (remote control, email service, online monitoring)

technical parameter:

1. Light source: 3×2200W gas-cooled xenon lamp tube

2. Service life: 1500 hours

3. Filters: XENOCHROME (300/320) and shop light sources that are not easy to age

4. Irradiance control: 300-400nm or 300-800nm ​​automatic control

5. Irradiance range: bottle rack 25-200W/m2 (300-400nm) 200-950W/m2 (300-800nm) packaging rack 15-120W/m2 (300-400nm) 200-950W/m2 (300-800nm) )

6. Light monitoring:

7. Humidity control: not available

8. Humidity range: not available

9. Temperature control (CHT): automatic

10. The temperature range of the test box (CHT): 15-70°C (cooling device is required)

11. Blackboard temperature (BST) and black mark temperature (BPT) range: BST 25-130℃ (with cooling device) BPT25-95℃ (with cooling device)

12. Simultaneously control the temperature of the blackboard and the cabinet: standard

13. Sample rack type: up to 15 bottle racks, up to 22 packaging racks

14. Exposure test area:

15. TFT full-color touch screen control panel display all test parameters: 5.7 inches

16. Multi-language (Asia and Europe): Standard

17. Automatic test time countdown kJ/m2: standard

18. Data acquisition interface: RS232 or memory card

19. Online programming and Ethernet monitoring:

20. Power supply: 400 V, 50/60 Hz (3, N, PE) 32 A can be customized

21. Dimensions (length×width×height): 200×90×

Optional:

1. Sample holder D (drinks): the circumference of the stainless steel sample holder is 25 cm and the maximum height is 34 cm; capacity: 7 bottles (diameter ≥ 9 cm); 11 bottles (diameter ≥ 5-9 cm); maximum load specification: 20 Kilogram

2. Sample holder F (food): stainless steel sample holder and horizontal ring are used to install flexible packaging samples of various sizes

3. Store Light Filter

4. XENOCHROME300 (filter, used for simulated outdoor test at 300nm on the UV incision)

5. XENOCHROME320 (filter, used to simulate the rear window glass test at 320nm on the UV incision)

6. XenoCal WB300-800 sensor

7. XenoCal WB300-400 sensor

8. XenoTouch add-on; remote control, email service, online monitoring