The ATLAS Ci4000
xenon lamp aging tester adopts a water-cooled xenon lamp and a new digital control system. It has established a monument in the application of digital and optical technology to aging test instruments. The Ci4000 series has been recognized by many manufacturers in the automotive, plastics, paint coating, ink, packaging, actinic materials, and pigment, dye, stabilizer and additive industries, and is recognized as accurate, repeatable and reproducible. Equipment that predicts the service life of the product. The Ci4000 series has obtained CE, UL, CAS, ISO and EN certifications from international standards organizations.
Compliance with standards:
AATCC TM16-1998, AATCC TM16-2004, AATCC TM169, ASTM C1442, etc.
Scope of application:
Used for automotive materials, plastics, inks, paints and coatings, packaging, photochemical materials, and pigments, dyes, stabilizers and additives, industrial and surface textiles, etc.; used for testing and evaluation of material aging.
![ATLAS]()
xenon lamp aging tester src=/d/file/p/2021/11-17/007150602cfd9243cc067896e90084e4.jpg />
Technical features:
1. Support 6500W high-power precision water-cooled xenon lamp tube
2. Total exposure area: 6,500 cm2 (1,008 in2)
3. Automatic rotating 3-layer sample rack
4. Large-screen full-color TFT display automatic diagnosis information
5. Directly set and control the irradiance 340nm/420nm, 300-400nm
6. Directly control the temperature in the box and the temperature of the blackboard or/and black mark
7. Set and control relative humidity directly
8. Directly set and control the air temperature in the test chamber
9. Display diagnostic information
10. Built-in 14 most important international standards
11. Support 12 customer custom programming
12. Multilingual display (Chinese, English, French, German, Spanish, Japanese, Korean)
13. U disk data output interface
14. Built-in global patented Smart Damper? Automatic air supply wind speed adjustment and intelligent air regulation system
15. Built-in global patented Smart Light? Intelligent light monitoring system
16. Spray system on the back of the sample rack
17. Filter combinations to meet all test standards
18. Air intake pipe dust filter
19. CS-7 xenon lamp cooling system
20. Automatic water quality monitoring and automatic alarm
21. The calibrated reference xenon lamp;
22. The observation window of the test chamber is made of grade 316 stainless steel;
23. Global universal power system, suitable for various frequency, voltage and electrical requirements
24. Electrical safety performance meets CE, UL, CSA, EN, ISO standards
25. Automatic countdown function based on irradiation amount and time
26. The sample rack can hold many types of samples
27, VibraSonicTM humidification system
technical parameter:
1. Light source: 6500W water-cooled xenon lamp
2. Service life (1 solar standard): 1200 hours
3. Filter: internal and external filters can be replaced
4. Irradiance control: 340/420 or 300-400nm select single point automatic control, optional second point monitoring
5. Light monitoring: SmartLightTM monitor
6. Relative humidity control: automatic
7. Humidity range: light cycle: 10-75% (determined by temperature), dark cycle: up to 100%
8. Temperature control: automatic
9. Blackboard or black mark temperature: BPT 40-110 ℃/ BST40-120 ℃
10. Simultaneous control of BPT or BST and the temperature in the box: standard
11. BPT/BST dual control: optional
12. Sample rack type: 3 layers
13. Exposure test area: 6500cm2 (1008in2)
14. Power supply: three-phase three-wire 200-250V 50A 50/60HZ 9.5KW three-phase four-wire 340-415V 47A 50/60HZ 9.5KW
15. HVAC-MJ/h (BTU/h) (maximum): 41.36MJ/h (39203BTU/h, 450CFM)
16. Compressed air: 0.11m3/min (maximum 4CFM), @552kPa, (80psi)
17. Water flow:
(1) Pressure: 138-345kPa (20-30psi)
(2) Humidification: deionized water 0.2 L/min
(3) Sample spraying: deionized water 0.2 L/min
(4) Sample rack spray: deionized water 0.2 L/min
(5) Xenon lamp cooling flow @4000W: deionized water 1.5L/min
18. Dimensions (L x W x H): 127 x 102 x 198cm
19. Base: 148 x 274cm (including access room)
20. Weight: 641kg (1410lb)
Standard configuration:
1. 1 host
2. 4000 hours spare parts kit (2 xenon lamps, 2 external filters, 10 external filters, etc.)
3. 1 standard calibration lamp
4. 1 set of blue label (meet AATCC ISO and other standards)
5, 3 layers of rotatable lantern stand 1 set
Optional accessories:
1. BPT/BST dual control: optional
2. Irradiance control: 340/420nm or 300-400nm select single point automatic control, optional second point monitoring
3. The refrigeration coil installed in the air duct (not including the necessary refrigeration device)
4. S3T specific sample surface temperature system
5. WXView (climate observation) data acquisition system
6. LiquiAirTM-LiquiAir self-service xenon lamp cooling system
7. Auxiliary lantern stand that meets special test requirements
8. Caster (4 feet) includes adapter and installation instructions
9. LS-200 full spectrum monitoring equipment
10. Stretch the legs (4 feet: 15 cm lifting device)
11. XenoCal? Radiation calibration equipment
12. Ambient air conditioning unit ACU
13. Pure water system
14. Ice water system
15. Air compression system