We Have More Than 10 Years of Experience.
  1. HOME > News

Water and dustproof equipment case

Waterproof and dustproof equipment box Applicable to electrical and electronic products that may be exposed to water during transportation, storage or use. These waters come from heavy rainstorms, wind and rain, sprinklers, wheel splashes, dishwashing water or violent waves. The specification should detail whether the electrical and electronic products must function normally during the test.

Waterproof and dustproof equipment box is used to determine the adaptability of electrical and electronic products to the rainy environment. The rain The test chamber is suitable for testing the waterproofness of automobile lamps, wipers, waterproof strips, locomotive instruments and low-voltage electrical enclosure protection.

Main parameters:

1st Spray Hole: 0.4-1.0mm

2. Number of Nozzles: 16-20

3. Spray Hole Spacing: 50mm

4. Spray ring radius: R375 mm

5. Spray tube diameter: 20mm

6. Pan angle Pan tube: 60, 90, 130

7. Pan speed setting: stepless setting

8. Rainwater Print: 3Kpa

9. Volume of water supply: 10 kg

10. Flow rate: 24.5 litres/min

11. Test bench speed: 1~17r/min adjustable

12. Test bench area: (order information)

13. Rainwater: local clean tap water

Install location

1. Temperature: +25℃

2. Relative humidity: no more than 85% R H

3. Atmospheric pressure: 86 ~106kPa

4. No strong vibrations around

5. No direct sunlight or direct radiation from other heat sources

6. There is no strong When the surrounding air needs to flow strongly, the airflow should not be blown directly onto the box

7. There is no strong electromagnetic field nearby

8. There is no high concentration of dust and corrosive substances in the environment

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!