We Have More Than 10 Years of Experience.
top-ban
  1. HOME > News

High temperature aging test chambers are generally applicable to some experiments.

2022-07-12

High-temperature aging test chamber With a xenon arc lamp capable of simulating a full-sun-sugle spectrum, it can provide corresponding environmental simulation and acceleration tests for scientific research, product development and quality control. The xenon aging test chamber can be used for the choice of new materials, improve the modification of existing materials or evaluate changes in durability after the composition changes. High temperature aging test chamber can be well simulated in different environmental conditions, the material is exposed to changes in the sun.

High-temperature aging test chamber consists of ozone generators, fans, baffles, sample frames and sample bins. Ozone generators are discharged through grid by high voltage transformers. Before the generator is placed before the low voltage fan. The ozone is injected into the test warehouse through the partition system. The sample frame is a separation clip mounted on a wire slip ring, which can be applied to a sample of various sizes.

High-temperature aging test chamber

is generally applicable to some experiments, because such experimental equipment has a relatively special requirements, so on, in use When we pay attention to some of the conditions used to ensure good use.

The foundation is a point to do the flatness of the ground and have a good ventilation condition. Around the device, there is no more vibration, there is no relatively strong

magnetic field around

, and the space used should not be flammable and explosive. There is also a safe maintenance space.

The ozone generator, controller, closed epithel ozone concentration control, and a rotating detect of 24 samples can be accommodated. By simple settings, pre-set parameters and current parameters can be displayed on the screen, thereby improving the performance of the device and the performance of the test results.

1 . Equipped with a sensor. When the ozone concentration is 5 ppm, the control accuracy is plusmn; 20%. At the same time, there is a durable counter. When the test chamber is full, 5 ppm ozone concentration can be reached in about 5 minutes.

2, stainless steel test boxes with large ultraviolet glass observation windings, and can be controlled by closed-loose ozone concentration. Rotating the sample frame can accommodate 24 samples. LED test box with automatic shutdown function increases the testing effect.

3,

High-temperature aging test chamber

In order to improve safety performance, the equipment is equipped with a box door safety interlock function, ozone decomposition catalyst and negative load with exhaust monitoring Pressure design.

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!

toTop