We Have More Than 10 Years of Experience.
top-ban
  1. HOME > News

Maintenance of the UV weathering test chamber can only be done in these 7 things.

2022-07-20


UV weathering test chamber

can be reproduced in sunlight, rain and dew beads. The equipment is carried out by increasing the temperature of the temperature by exposing the information to be tested in the interaction cycle through the controlled sunlight and moisture. The equipment is imitated with ultraviolet fluorescent lamps, and can also mimic moisture through condensation or spraying methods.


The experimental chamber uses a fluorescent ultrafield lamp as a light source, by imitation Ultraviolet radiation and condensate in natural sunlight, accelerate weather resistance experiments for data to obtain data weather resistance. It can mimic the ultraviolet, rain, high temperature, high humidity, condensation, darkness, and other environmental conditions in the natural weather. By reproduce these conditions, merge into a loop and let it perform the number of completed cycles.

So

UV weathering test chamber maintenance should pay attention to What? Just remember 7 points below, you can learn how to make a daily maintenance of it:


1. Ultraviolet The optical resistance box device is in the process of operation, please remember to maintain a sufficient water source.

2. Try to turn on the door at the door during the experimental stage.

3. There is a sensor device in the working chamber, do not suffer a strong hit.


4. After the long time is stopped, if you need to use it again, you must carefully check the water source, power supplies, and components. Determine the labeling after error.

5. Because of the ultraviolet radiation

has a strong damage to the person (especially the eyes), the operator Should try to reduce the touch ultraviolet (the touch time should be less than 1 min). It is recommended that the operator is fitted with protective eyewear and sheath.

6. After use, the plastic mask is prevented from being invaded. If there is dust, it should be eradicated.

7. When the device is in non-working conditions, it should be kept dry, discharged from the water, dry the studio and the box..

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!

toTop