Four technical differences between hot and cold impact test chambers and high and low temperature te

The difference between the hot and cold impact test chamber and the high and low temperature test chamber 1. Temperature conversion speed:

The relative conversion speed of the high and low temperature box is slow, due to the diversity of test requirements, the manufacturer will be based on the guest It is required to manufacture various non-standard products. Different configuration requirements are different. You will be able to explain to the manufacturer before buying, or do more economical conventional machine lifting temperature at 1 ~ 3 degrees / minute The conventional high and low temperature box is a temperature rise of 3 degrees per minute, cooling every minute.

The temperature conversion speed of the hot and hot impact test chamber is very fast, generally from ZUI high temperature to ZUI low temperature conversion time within 3 to 5 minutes, and is called high low temperature impact test chamber or rapid temperature temperature temperature change test box. The conventional hot and cold impact test chamber is quickly completed to normal temperature or constant temperature to low temperature or normal temperature to low temperature, and the difference between the temperature changes is different!
The difference between the cold and hot impact test chamber and the high and low temperature tank. The temperature cutting process:

These two test chambers are high and low temperature tests. But they have a zui fundamental difference is that the high and low temperature box is to see the product changes in the process of cooling, and the cold and hot impact test chamber does not have this cooling process, which is the temperature of the product instantly Change change.

The difference between the cold and hot impact test chamber and the high and low temperature tank:

The hot and cold impact test chamber is not equipped with humidity efficacy, and the high and low temperature cycle has a waterway system, so With the high and low temperature box, you can test the humidity test!

The difference between the cold and hot impact test chamber and the high and low temperature tank. Application range:

The hot and hot impact test chamber is mainly for electrician, electronic product machine and components for cold-resistant test, temperature rapid changes Or the adaptive test chamber under gradient conditions is especially suitable for environmental stress screening (ESS) tests for electrical and electronic products. The test equipment is mainly used to perform environmental simulation testing of the product in accordance with national standards or customization requirements, high temperature and low temperature instantaneous requirements, after testing, after testing, to determine the product Performance, whether it is still able to meet the requirements for product design, improvement, identification and factory inspection.

High and low temperature tanks are used in electrical, electronic products, components, components, and adaptation tests when storing, transporting, and use in high and low temperature environments, and temperature gradient tests. Electronic components can also be used for stress screening trials.